Technopolymer actuator with stainless steel pinion

UT Tecnopolimero

Use

The rack & pinion pneumatic actuator produces linear torque output in a compact design utilizing the same body and end caps for double acting and spring return units. Double Acting or Spring Return with spring cartridges made with non metallic materials (springs are epoxy coated).

Description

Namur VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required to mount solenoid valves, limit switches or positioners. Stainless steel pinion with anti-blowout protection in both directions.
All fasteners are in stainless steel All units are externally stamped with a progressive traceable serial number.
100% of all units are factory pressure and leak tested, and individually boxed for shipment

Using range

Air pressure operation from 1 to 8 bars (40 to 150 psi). Water, nitrogen and compatible hydraulic fluids may also be used to power the actuator.
All external fasteners are corrosion resistant stainless steel. Working temperature -20+80°C

Models

Options

Available sizes

VAR	A	B	C	D	E	H	L	P	Kg
10	70	91	67	53	10	22	119	11	0,570
13	90	111	86	70	10	33	160	14	1,190
18	111,5	132,5	101	70	10	33	175	17	1,970

Picture, dimensions and features could change at any time

Ultimo aggiornamento: 14/07/2025

BART S.r.l - Via Pietro Magistretti, 9 - 20128 Milano (Italia) Tel. +39.02.27206577 - Fax +39.02.25902084 - info@bart-e.com

UT Tecnopolimero POLYMER ACTUATOR

Use

Code

Use

Description

Using range

Models

Options

Available sizes

Information

Chemical compatibility